MFII-Series-10kVA

A DSP-controlled, true online double-conversion UPS with IGBT-based inverter and rectifier delivers pure sine wave output and high efficiency. It features low input harmonics (≤3%), high input/output power factors, and a wide input voltage and frequency range. The system supports configurable battery groups, ECO mode, self-testing, parallel operation (up to 4 units),

Download PDF Contact me

Features:

DSP Controlled True Online Double Conversion
IGBT based both Inverter & Rectifier Technology
Pure Sine Wave Output
Input Current Harmonic ≤ 3%
Optimization Battery Group (16/18/20 configurable)
High Input Power Factor 0.99
High Output Power Factor 1.0 (kVA = kW)
Wide Input Voltage Range: 100V-300V AC
Wide Input Frequency Range
Support Economic Operation (ECO) Mode
Self-Testing while UPS Startup
Optional Parallel up to 4 units
Support Common Battery Bank Operation
In-built Static Bypass and Cold Start feature
Auto Start and cold start function
Generator Compatibility

Flexible Configuration :

Various type of alarms :-

Overview:

Technical Specifications

MODEL		MFII1110B16	MFII1110L16
Capacity		10 kVA	10 kVA
INPUT
Nominal Voltage		220V / 230V / 240V AC (L+N+PE)
Operating Voltage Range		100V~300V AC Load Dependent
Operating Frequency Range		50 / 60 Hz ± 10% (Auto Sensing)
Power Factor		≥0.99
Bypass	Voltage	- 40% ~ +15% (Configurable)
	Frequency	± 5% (Configurable)
ECO Range		Same as the Bypass, can be configured
Generator Input		Compatible
OUTPUT
Rated Voltage		220V / 230V / 240V AC L+N+PE (Configurable)
Power Factor		1.0
Voltage Regulation		±1%
Frequency		Auto Sensing 50 / 60 Hz ± 1~10% Sync Mode (Configurable), 50/60 Hz ± 0.5 Hz Battery Mode
Crest Factor		3:1
Overload		≤105% for Continuos, ≤ 125% for 10 Min, ≤ 150% for 60 Sec, ≥ 150% for 200ms
Harmonic Distortion (THDv)		≤ 1%
Efficiency		94.0% Dual Conversion Mode, 99.0% ECO Mode
BATTERY
Battery Voltage		Inbuilt 16 Nos. of 12V/9Ah	192V DC / 216V / 240V DC (Configurable)
Typical Recharge Time		4-5 Hours to 90% of full Capacity
Charge Current		10A (Configurable)
SYSTEM FEATURES
IP Protection		IP20
Transfer Time		Zero
EPO / ECO / CVCF		Shutdown UPS Immediately / ECO and CVCF Mode can be Configurable
Alarm / Protection		Short Circuit, Input Under/Over Voltage, Over Temperature, Over Current, Over Load, DC BUS Under / Over Voltage and Battery low
LED Display		Line Mode, Backup Mode, ECO Mode, Bypass Mode, Battery Low, Overload & UPS Fault
LCD Display		Input Voltage, Input Frequency, Output Voltage, Frequency, Current; Load Percentage, Battery Voltage, Charging/ Discharging/Current Temperature & Remaining Battery Backup Time, Load VA/W, Load and Battery Barograph
ENVIRONMENTAL
Temperature		Operating: 0~50°C*, Storage: -15ºC ~ 60ºC
Humidity / Altitude		0~95% RH Non-condersing / <1500 M
Noise		<55dBA
PHYSICAL
Dimension WxDxH (mm)		192 x 460 x 655	192 x 460 x 350
Net Weight (Kg)		94	33
STANDARDS
Quality		ISO 90001, ISO 14001, ISO 27001, ISO 45001, ISO 50001, BIS, RoHS, FCC
Safety		IEC/EN62040-1; Conformity to IEC / EN
EMC / Performance		IEC/EN62040-2; IEC/EN62040-3, Complying to CE, Compliance to UL
COMMUNICATION INTERFACE
Standard		RS-232
Optional		SNMP / ModBus / Dry Contact / USB / RS-485 / SMS Alert Card
Monitoring Software		BPE Cyber/ UPSilon 2000 / Muser 4000

Contact

For More Information about product please contact us

Power Solution

Solar Inverter

Active Power Filter

Accessories

Battery Energy Storage System

Servo and Isolation

Special Products

All Product Catalogue