MFXII 10~20 kVA

IGBT-based double conversion UPS with DSP control, pure sine wave output, wide input range (208–480V), unity power factor, ECO mode, and generator compatibility. Supports 3/1 & 1/1 operation, parallel up to 4 units, with static bypass and cold start.

Download PDF Contact me

Features:

True Online Double Conversion with DSP Controlled Pure Sine Wave Design
IGBT based both Inverter & Rectifier
Optimization Battery Group
High Input Power Factor 0.99
High Output Power Factor 1.0
Wide Input Voltage Range: 208~480V AC Wide Input Frequency Range (50Hz: 45~55Hz / 60Hz: 54~66Hz)
Generator Compatibility & Phase Reversal Protection
Support Economic Operation (ECO) Mode
Self-Testing while UPS Startup Optional Parallel up to 4 units Static Bypass, Auto Start and Cold Start
Support 3/1 & 1/1 Operation
Inbuilt Transformer

Flexible Configuration :

Various type of alarms :-

Overview:

Technical Specifications

MODEL	MFXII3110L16 10 kVA	MFXII3115L16 15 kVA	MFXII3120L16 20 kVA
INPUT
Nominal Voltage	380V / 400V / 415V AC (3P + N + PE)
Operating Voltage Range	208V~480V AC Load Dependent
Operating Frequency Range	50 / 60 Hz ± 10% (Auto Sensing)
Power Factor	≥0.99
Bypass Voltage	-40% ~ +15% (Configurable)
Bypass Frequency	± 5% (Configurable)
Eco Range	Same as the Bypass, can be configured
Generator Input	Compatible
OUTPUT
Rated Voltage	220V / 230V / 240V AC (L-N+PE Configurable)
Power Factor	1.0
Voltage Regulation	±1%
Frequency	Auto Sensing 50/60Hz ±1-10% Sync Mode (Configurable), 50/60Hz ±0.5Hz Battery Mode
Crest Factor	3:1
Overload Capability	≤105% for Continuous, ≤125% for 1 min, ≤150% for 30 Sec, ≤150% for 200ms
Harmonic Distortion (THD)	≤1%
Efficiency	94.0% Dual Conversion Mode, 99.0% ECO Mode
BATTERY
Battery Voltage	Standard: 192~240V DC (Configurable) Optional: 384~480V DC (Configurable)
Typical Recharge Time	4-5 Hours to 90% of full capacity
Charge Current	10A
SYSTEM FEATURES
IP Protection	IP20
Transfer Time	Zero
ECO / ECO+ / CVCF	Shutdown UPS Immediately / ECO and CVCF Mode can be Configurable
Alarm / Protection	Short Circuit, Input Under/Over Voltage, Over Temperature, Over Current, Over Load, DC Bus Under/Over Voltage and Battery Low
LED Display	Line Mode, Backup Mode, ECO Mode, Bypass Mode, Battery Low, Overload & UPS Fault
LCD Display	Input Voltage, Input Frequency, Output Voltage, Frequency, Current, Load Percentage, Battery Voltage, Charging/Discharging, Temperature, Battery Backup Time, Load VA/W, Load and Battery Bar Graph
ENVIRONMENTAL
Temperature	Operating: 0~50°C, Storage: -15°C~60°C
Humidity / Altitude	0~95% RH Non-condensing / <1500M
Noise	<55dBA	<58dBA	<58dBA
PHYSICAL
Dimension W×D×H (mm)	250 × 620 × 1010
Net Weight (Kg)	44	51	56
STANDARDS
Safety	ISO 9001, ISO 14001, ISO 27001, ISO 45001, ISO 50001, BIS, RoHS, FCC
EMC	IEC/EN62040-2, Complying to IEC / EN
Performance	IEC/EN62040-2, IEC/EN62040-3 Complying to CE, Compliance to UL
COMMUNICATION INTERFACE
Port	RS-232
Interface	SNMP / ModBus / Dry Contact / USB / RS-485
Monitoring Software	NetAgent Utility v5.8 / View Power / UPSilon 2000 / Muser 4000

Contact

For More Information about product please contact us

About BPE

Experience center

Power Solution

Solar Inverter

Active Power Filter

Accessories

Battery Energy Storage System

Servo and Isolation

Special Products

All Product Catalogue

Proposition

Application

Case study

Get Acquainted