MFII Series 10kVA

True Online Double Conversion UPS with DSP-controlled pure sine wave output, IGBT-based inverter and rectifier, low input harmonic distortion (≤3%), high input/output power factors (0.99/1.0), wide voltage (208–480V) and frequency range, battery optimization (16–20 units), generator compatibility, ECO mode, self-testing at startup, optional parallel operation up to 4 units, static bypass, cold start, and flexible 3/1 & 1/1 operation.

Download PDF Contact me

Features:

True Online Double Conversion with DSP Controlled Pure Sine Wave Design
IGBT based both Inverter & Rectifier w Input Current Harmonic: ≤ 3%
Optimization Battery Group, The Quantity of Battery: 16/18/20 Nos.
High Input Power Factor 0.99 w High Output Power Factor 1.0
Wide Input Voltage Range: 208~480V AC
Wide Input Frequency Range (50Hz: 45~55Hz / 60Hz: 54~66Hz)
Generator Compatibility & Phase Reversal Protection
Support Economic Operation (ECO) Mode
Self-Testing while UPS Startup
Optional Parallel up to 4 units
Static Bypass and Cold Start Support 3/1 & 1/1 Operation

Flexible Configuration :

Various type of alarms :-

Overview:

Technical Specifications

MODEL	MFII3110L16
Capacity	10 kVA
INPUT
Nominal Voltage	380V / 400V / 415V AC (3P+N+PE)
Operating Voltage Range	320V~480V AC Load Dependent
Operating Frequency Range	50 / 60 Hz ± 10% (Auto Sensing)
Power Factor	≥0.99
Bypass Voltage	-40% ~ +15% (Configurable)
Bypass Frequency	±5% (Configurable)
ECO Range	Same as the Bypass, can be configured
Generator Input	Compatible
OUTPUT
Rated Voltage	220V / 230V / 240V AC L+N+PE (Configurable)
Power Factor	1.0
Voltage Regulation	±1%
Frequency	Auto Sensing 50 / 60 Hz ± 1~10% Sync Mode (Configurable), 50/60 Hz ± 0.5 Hz Battery Mode
Crest Factor	3:1
Overload	≤105% for Continuous, ≤125% for 10 Min, ≤150% for 60 Sec, ≥150% for 200ms
Harmonic Distortion (THDv)	≤1%
Efficiency	94.0% Dual Conversion Mode, 99.0% ECO Mode
BATTERY
Battery Voltage	192V DC / 216V & 240V DC (Configurable)
Typical Recharge Time	4-5 Hours to 90% of full Capacity
Charge Current	14A
SYSTEM FEATURES
IP Protection	IP20
Transfer Time	Zero
EPO / ECO / CVCF	Shutdown UPS Immediately / ECO and CVCF Mode can be Configurable
Alarm / Protection	Short Circuit, Input Under/Over Voltage, Over Temperature, Over Current, Over Load, DC BUS Under / Over Voltage and Battery low
LED Display	Line Mode, Backup Mode, ECO Mode, Bypass Mode, Battery Low, Overload & UPS Fault
LCD Display	Input Voltage, Input Frequency, Output Voltage, Frequency, Current, Load Percentage, Battery Voltage, Charging/Discharging/Current Temperature & Remaining Battery Backup Time, Load VA/W, Load and Battery Barograph
ENVIRONMENTAL
Temperature	Operating: 0~50°C*, Storage: -15°C ~ 60°C
Humidity / Altitude	0~95% RH Non-condensing / <1500 M
Noise	<55dBA
PHYSICAL
Dimension WxDxH (mm)	250 x 580 x 655
Net Weight (Kg)	37
STANDARDS
Quality	ISO 90001, ISO 14001, ISO 27001, ISO 45001, ISO 50001, BIS, RoHS, FCC
Safety	IEC/EN62040-1; Conformity to IEC / EN
EMC / Performance	IEC/EN62040-2 ; IEC/EN62040-3, Complying to CE, Compliance to UL
COMMUNICATION INTERFACE
Standard	RS-232
Optional	SNMP / ModBus / Dry Contact / USB / RS-485 / SMS Alert Card
Monitoring Software	NetAgent Utility v5.8 / View Power / UPSilon 2000 / Muser 4000
*Conditions apply. Specifications are subject to change without prior notice.

Contact

For More Information about product please contact us

About BPE

Experience center

Power Solution

Solar Inverter

Active Power Filter

Accessories

Energy Storage System

Servo and Isolation

Special Products

All Product Catalogue

Proposition

Application

Case study

Get Acquainted