PS 15 Series

Advanced DSP-based True Online UPS with 3-Level IGBT technology. Features wide input voltage/frequency range, low harmonics, high power factor, and flexible 1-Phase & 3-Phase input configurations. Includes hot-swappable modules, emergency shutdown, generator compatibility, and cold start function. Intelligent fan control and active PFC for energy efficiency and extended system life.

Download PDF Contact me

Features:

DSP-Based True Online Double Conversion for precise and efficient power control.
3-Level IGBT Rectifier & Inverter for high efficiency and low harmonic distortion.
Wide Input Voltage (40-70Hz) & Frequency Range for flexible compatibility.
<3% Input Current Harmonics & ≥0.99 Power Factor for improved energy efficiency.
Configurable Battery Rack (16/18/20 Nos.) for optimized energy storage.
1-Phase & 3-Phase Input Options, depending on system configuration.
Emergency Power Off (EPO) & Generator Compatibility for added reliability.
Cold Start & Hot-Swappable Power Modules for easy maintenance and backup power.
Intelligent Fan Control to extend fan life and minimize maintenance.
Built-in Active Power Factor Correction for improved system efficiency.

Flexible Configuration :

Various type of alarms :-

Overview:

Technical Specifications

RACK MODEL	PS15R3MU			PS15R5MU
RACK MODEL	Maximum Number of Modules	3			5
Maximum Capacity	Capacity = No. of Modules x kVA of Module, Maximum Capacity = 50kVA
Dimension (WxDxH) in mm	600 x 840 x 1000			600 x 840 x 1400
Weight of Rack (kg)	142			156
POWER MODULE MODEL	PS1104L16	PS1106L16	PS1108L16	PS1110L16	PS3112L20	PS3115L20	PS3116L16
Module Capacity (kVA)	4	6	8	10	12	15	16
INPUT
Nominal Voltage	For 1 Phase: 220V / 230V / 240V AC (1Ph+N+PE) & For 3 Phase: 380V / 400V / 415V AC (3Ph+N+PE)
Voltage Range	120V~280V AC Load Dependent (Phase - Neutral)
Frequency Range	40-70Hz
Power Factor	≥ 0.99
THDi	< 3%
Bypass Voltage Range	Max. Voltage : 25% for 220/380V, 20% for 230/400V & 15% for 240/415V Min. Voltage : -45% (Optional -10%, -20% & -30%)
OUTPUT
Output Voltage, Regulation	220V / 230V / 240V AC (L+N) ± 1%
Power Factor	1.0
Frequency Range	Auto Sensing 50 / 60 Hz ± 1-10% Mains Synchronized (Configurable), 50 / 60 Hz ±0.1Hz Battery Mode
Crest Factor	3:1 (max.)
Harmonic Distortion	≤ 2 %
Transfer Time	Zero
Waveform	Pure Sinewave
Overload	≤ 110% for 60 min, ≤125% for 10 min, 150% for 200 ms
Efficiency	96.5% Dual Conversion Mode, 99% ECO Mode
Waveform	Pure Sine Wave
BATTERY CHARGER
Battery Quantity	16-20 Nos.
Charging Current (Module)	16A
Rack with UPS
IP Protection	IP 20
Alarm / Protection	Short Circuit, Input Under/Over Voltage, Over Temperature, Over Current, Over Load, DC Bus Under/Over Voltage and Battery Low
LED / LCD	UPS status, Load % / VA / W, Battery level, Input/Output voltage, Discharge timer, and Fault Code
Display	7 inch LCD Display on rack
STANDARDS
Quality	ISO 9001, ISO 14001, ISO 27001, ISO 45001, ISO 50001, RoHS
Safety	IEC/EN62040-1
EMC/ Performance	IEC/EN62040-2; IEC/EN62040-3, Complying to CE
PHYSICAL
Dimension W x D x H (mm)	443 x 580 x 131 (3U)
Net Weight (kg)	29
ENVIRONMENT
Temperature	Operating: 0 ~ 50°C*, Storage: -15 ~ 60°C
Humidity / Altitude	0-95% RH Non-condensing / <1500 m
Noise	< 60dBA
COMMUNICATION
Standard	RS-232, Battery Temp. Comm., RS-485, Parallel Intelligent slot x 2, Dry Contact
Optional	SNMP / ModBus / USB
Monitoring Software	NetAgent Utility v5.8 / View Power / UPSilon 2000 / Muser 4000

Contact

For More Information about product please contact us

About BPE

Experience center

Power Solution

Solar Inverter

Active Power Filter

Accessories

Battery Energy Storage System

Servo and Isolation

Special Products

All Product Catalogue

Proposition

Application

Case study

Get Acquainted