MF Series 6kVA

A true online double-conversion UPS with DSP-controlled design, delivering pure sine wave output via IGBT-based rectifier and inverter. Features wide input voltage (110–300V) and frequency range, high input power factor (≥0.99) with low harmonics (≤3%), and unity output power factor. Optimized for long battery life with CVCF charging and supports 192V/216V/240V battery configurations.

Download PDF Contact me

Features:

True Online Double Conversion Topology
DSP Controlled Design
Pure Sine wave output waveform
IGBT based both Rectifier & Inverter
Wide Input Voltage Range (110V -300V AC)
High Input Power Factor (≥0.99)
Input Current Harmonic ≤ 3%
Wide Input Frequency Range
High Output Power Factor (Unity, kVA=kW)
Optimization Battery Group (192V/216V/240V DC)
CVCF Based Charging for long battery life
ECO mode for energy saving
Self-Testing while UPS Startup
Common Battery Bank Operation
Static Bypass and Integrated Maintenance Bypass
Auto Restart and Cold start function
Optional Parallel Compatibility up to 4 units
Inbuilt Surge Protection
Generator Compatibility

Flexible Configuration :

Various type of alarms :-

Overview:

Technical Specifications

MODEL	MF1106B16	MF1106L16
Capacity (kVA/kW)	6 kVA/kW
Type	Internal Battery	External Battery
INPUT
Nominal Voltage	220V/230V/240V AC (P+N+PE)
Operating Voltage Range	110V~300V AC (Load Dependant)
Operating Frequency Range	50/60 Hz ± 10% (Auto Sensing)
Power Factor	≥ 0.99
Bypass	Voltage	-40% ~ +15% (Configurable)
Bypass	Frequency	±5% (Configurable)
ECO Mode Range	Same as the Bypass (Configurable)
Generator Input	Compatible
OUTPUT
Rated Voltage (Configurable)	220V/230V/240V AC (P+N+PE)
Power Factor	1.0
Voltage Regulation	±1%
Frequency	Auto Sensing 50/60 Hz ± 1~10% Sync Mode (Configurable), 50/60 Hz ± 0.1% Battery Mode
Crest Factor	3:1
Overload	≤105% for Continuos, ≤125% for 10 Min, ≤150% for 60 Sec, ≥150% for 200ms
Harmonic Distortion (THDv)	≤ 1%
Efficiency	94.0% Dual Conversion Mode, 99.0% ECO Mode
BATTERY
Battery Type	SMF VRLA 12V/9Ah	SMF VRLA / Lithium-ion
Battery Voltage	Inbuilt 16 Nos. of 12V/9Ah	192V/216V/240V DC (Configurable), 3-wire
Typical Recharge Time	4-5 Hours to 90% of full Capacity
Charge Current	1A~6.5A configurable (standard); 10A (optional)
SYSTEM FEATURES
IP Protection	IP20
Transfer Time	Zero
EPO	Shutdown UPS Immediately
Alarm / Protection	Short Circuit, Input Under/Over Voltage, Over Temperature, Output Over Load, DC Bus Under/Over Voltage, Battery low, Input Surge protection
LED Indication	Line Mode, Battery Mode, ECO Mode, Bypass Mode, Battery Low, Overload & UPS Fault
LCD	Input Voltage/Frequency, Output Voltage/Frequency, Load Current, Load Percentage, Battery Voltage, Charging/Discharging Current, Load/Battery Barograph, Temperature, Remaining Battery Backup Time, Load VA/W, Operating mode & Fault mode
ENVIRONMENTAL
Temperature	Operating: 0~50°C*, Storage: -15°C ~ 60°C
Humidity / Altitude	0~95% RH Non-condensing / <1500 M
Noise	<55dBA
PHYSICAL
Dimension WxDxH (mm)	190 x 480 x 750	190 x 480 x 350
Net Weight (Kg)	82	25
STANDARDS
Quality	ISO 90001, ISO 14001, ISO 27001, ISO 45001, ISO 50001, BIS, RoHS, FCC
Safety	IEC/EN62040-1; Conformity to IEC / EN
EMC / Performance	IEC/EN62040-2; IEC/EN62040-3, Complying to CE
COMMUNICATION INTERFACE
Standard	RS-232/USB/EPO
Optional	SNMP/ModBus/Dry Contact/IoT/Wi-fi & Bluetooth monitoring
Monitoring Software	BPE Cyber / UPSilon 2000

Contact

For More Information about product please contact us

About BPE

Experience center

Power Solution

Solar Inverter

Active Power Filter

Accessories

Battery Energy Storage System

Servo and Isolation

Special Products

Data Center

Proposition

Application

Case study

Get Acquainted