The BPE CVT, the AC mains powers the input winding which is widely separated physically from the isolated output winding. The input winding normally runs at very moderate Flux linkage levels. The output winding exhibits an intrinsic energy storage characteristic and this energy storage operates in conjunction with mains capacitor to produce self generated AC Flux field which is indirectly excited from the input winding.
|
||||||||
Input Voltage | 180~260V AC (Others Range on Customer Demands) | |||||||
Input Frequency | 50Hz | |||||||
Output Voltage | 220/230V AC ±1% | |||||||
Effect of Frequency | ±1.6% for in output voltage for every 1% change in line Frequency | |||||||
Output Step-load Response | 2 Cycles (30~40 ms) | |||||||
Efficiency | ≥ 90% at full load | |||||||
Output Waveform | Pure Sine-Wave | |||||||
Waveform Distortion | ≥ 5% on full load | |||||||
Load Power factor | 0.75% Lagging to 0.9% Leading | |||||||
Ambient Temperature | -5~50º C | |||||||
Transformer Type | Ferro Resonant |
For More Information about product please contact us