HIGHLIGHTS

• 3-Level Rectifier and Inverter adopts IGBT Topology
• Ultra High Energy Efficiency >96.6%
• Full Rated Power Factor kVA=kW
• Parallel expansion to reach upto 8 MW
• N+N, N+1 redundancy mode configurable
• Automatic input phase reversal protection
• High input voltage range saves battery power
• Compatible for 100% regenerative loads with bidirectional power converters

    Innovative 3-Level Topology 

• GTC-MW Series with Innovative 3-Level Topology is a true on-line double conversion, three-phase UPS system that provides one of the highest level energy efficiencies in the industry. 
• 3-level inverter & rectifier design GTC-MW Series brings the newest power conversion technology and delivers efficiency up to 96.6% at 40-70% load operation which is the most common operating range.

    High Efficiency & Low Total Cost of Ownership

• Less energy consumption to supply the loads, thanks to high efficiency up to 96.6%.
• Reduced energy losses.
• Reduced electricity usage and air conditioning requirements. 
• Reduction in operating cost of UPS.
• IGBT based power factor correction technology provides input power factor close to 1 (≥ 0.99). The high input power leads to reduced electricity pay-out, minimizes cable, switchboard, fuse and generator requirements, thus reducing investment cost.
• Low input current total harmonic distortion (THDi) less than 3% helps to avoid the disturbance and expensive harmonic filters.
• Small footprint and easy maintenance.

    High Output Power Factor 1

• Output power factor of 1 (kVA=kW) rate provides up to 25% more active power than a traditional UPS. 
• Suitable for modern power supply application with unit or capacitive power factor (e.g. new servers generation).

    Reverse Energy Tolerance for Regenerative Load

• GTC - MW can be used with regenerative loads such as synchronous motors. The regenerative loads pump the energy back to mains, traditional UPS system burn this feedback energy and this causes lower efficiency. GTC - MW UPS with IGBT rectifier are able to absorb intermittent load generated power. Additionally, this reverse power tolerance permits execution of important system operations like closed transfers of the UPS load directly to an engine generator source. 

    Standard Electrical Features

• Parallel-Redundant (N+X) Systems
• Dual Input
• 3 Level IGBT Rectifier and Inverter
• Backfeed Protection
• Cold Start (Optional)
• Advanced Battery Management
• Short Circuit and Overload Protection
• Parallel Ready
• Redundant Power Supply
• Power Walk-in for Progressive Rectifier Start-up when the Mains is Restored
• Battery Temperature Sensor
• Static and Manual Bypass Operation
• 100% unbalanced load handling capability

    Advanced Communication Features

• RS232 Serial and RS485 Ports
• ModBUS RTU / ModBUS TCP (Optional)
• Remote Emergency Power Off (Optional)
• Dry Contact (Optional)
• SNMP (Optional)