Features:

Standard Electrical Features

• Parallel-Redundant (N+X) Systems
• Dual Input
• 3 Level IGBT Rectifier and Inverter
• Backfeed Protection
• Cold Start (Optional)
• Advanced Battery Management
• Short Circuit and Overload Protection
• Parallel Ready
• Redundant Power Supply
• Power Walk-in for Progressive Rectifier Start-up when the Mains is Restored
• Battery Temperature Sensor
• Static and Manual Bypass Operation
• 100% unbalanced load handling capability

Advanced Communication Features

• RS232 Serial and RS485 Ports
• ModBUS RTU / ModBUS TCP (Optional)
• Remote Emergency Power Off (Optional)
• Dry Contact (Optional)
• SNMP (Optional)

High Output Power Factor 1

• Output power factor of 1 (kVA=kW) rate provides up to 25% more active power than a traditional UPS.
• Suitable for modern power supply application with unit or capacitive power factor (e.g. new servers generation).

Reverse Energy Tolerance for Regenerative Load

GTPIX Series can be used with regenerative loads such as synchronous motors. The regenerative loads pump the energy back to mains, traditional UPS system burn this feedback energy and this causes lower efficiency. GTPIX Series UPS with IGBT rectifier are able to absorb intermittent load generated power. Additionally, this reverse power tolerance permits execution of important system operations like closed transfers of the UPS load directly to an engine generator source.

Flexibility

• Temperature sensor for external battery cabinets for extended runtimes.
• External battery cabinets for different sizes of batteries to provide extended runtimes.
• Frequency converter mode.
• Compatible version with EN 50171 for supplying power to emergency lighting systems

Perfect Generator Compatibility

GTPIX is Perfectly compatible with diverse sources, especially with generators. When generator power is used, thanks to its robust IGBT rectifier, it ensures clean, uninterrupted power to protected equipment. With high input power factor performance of GTPIX it is enough to chose generator with power only 20% higher rated then the UPS. GTPIX has the ability to adjust power walk in from 5 to 60 seconds, along with reduced input current distortion.

Maximum Availability

• Parallel configuration up to 8 units per redundancy (N+1) and power increase, upto 9.6MW
• Loop connection helps the UPS system to continue the operation when the connection cable is inturrupted,

‍